One of the most important functions to enable on your DVR or NVR is to enable motion detection recording. This way video is only recorded when motion is sensed by the security DVR and ultimately it will save you a lot of hard drive space and get the most recording time from your purchase. With analog CCTV cameras it is possible to get up to months of recorder security footage when using a 4TB drive even on a 16 channel system. Of course it depends how often motion events occur.
Here is an easy to follow video that shows you in 3 easy steps how to enable Motion Detection recording on your DVR or NVR purchased from 123 CCTV. If you have questions, please use the comments section below.
Sam Venzetti
Vice President of Operations at 123 CCTV
Sam started working at 123 CCTV in 2009 as the shipping department manager. Eventually he transitioned to a tech support and sales associate. In 2011, he became Vice President of Operations. He is a technical expert related to all things security camera related. Connect with Sam via: Google+
Latest posts by Sam Venzetti (see all)
- Motion Detection based Recording on your DVR and NVR - September 1, 2015
- Recording Camera Snapshots on your DVR - May 29, 2015